Scroll to Top

Volume : IV, Issue : III, April - 2014

REVIEWON DEFECTS ON STONE CRUSHER CASTINGS

K. Subrahmanyam, Ch. V enkata Rajesh V . V arun Kumar

By : Laxmi Book Publication

Abstract :

This processes to prepare the product to fallow the step by step procedures are pattern making is the first stage for developing a new casting .this pattern is typically constructed from teak wood and the mould is formed in a mould box, which is typically constructed in two halves to assist in removing the pattern, by using electric induction furnace to prepare the molten metal this metal preparation to mix the correct proposition of alloys. Molten metal is Transferred from the furnace to a ladle and held until it reaches the desired Pouring temperature. The molten metal is poured into the mould and allowed to solidify . So finally cooling and fettling and dressing, shakeout processes uses.

Keywords :


    Article :


    Cite This Article :

    K. Subrahmanyam, Ch. V enkata Rajesh V . V arun Kumar (2014). REVIEWON DEFECTS ON STONE CRUSHER CASTINGS. Indian Streams Research Journal, Vol. IV, Issue. III, http://isrj.org/UploadedData/4572.pdf

    References :

    1. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    2. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    3. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    4. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    5. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    6. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    7. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    8. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    9. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    10. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    11. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    12. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    13. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    14. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    15. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    16. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    17. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    18. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    19. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    20. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    21. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    22. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    23. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    24. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    25. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    26. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    27. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    28. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    29. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    30. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    31. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    32. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    33. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    34. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    35. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    36. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    37. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    38. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    39. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    40. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    41. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    42. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    43. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    44. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    45. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    46. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    47. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    48. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    49. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    50. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    51. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    52. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    53. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    54. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    55. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    56. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    57. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    58. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    59. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    60. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    61. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    62. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    63. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    64. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    65. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    66. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    67. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    68. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    69. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    70. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    71. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    72. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    73. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    74. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    75. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    76. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    77. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    78. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    79. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    80. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    81. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    82. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    83. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    84. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    85. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    86. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    87. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    88. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    89. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    90. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    91. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    92. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    93. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    94. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    95. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    96. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    97. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    98. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    99. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    100. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    101. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    102. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    103. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    104. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    105. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    106. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    107. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    108. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    109. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    110. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    111. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    112. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    113. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    114. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    115. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    116. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    117. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    118. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    119. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    120. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    121. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    122. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    123. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    124. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    125. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    126. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    127. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    128. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    129. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    130. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    131. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    132. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    133. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    134. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    135. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    136. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    137. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    138. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    139. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    140. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    141. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    142. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    143. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    144. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    145. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    146. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    147. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    148. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    149. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    150. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    151. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    152. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    153. W . Heinrich, M. Porsche, “Methods for Automatic X-Ray Inspection of Castings,” IF ACDigital Image Processing in
    154. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    155. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    156. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    157. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    158. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    159. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    160. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    161. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    162. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    163. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    164. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    165. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    166. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    167. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    168. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive
    169. Metal –caster, V ol-xi,no-1, pp-21-24, Jan/Feb. 1999.
    170. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    171. Sohrab, “Quality management in foundry industry”, Indian foundry journal, vol. 41,no.4, 11-14,April 1995.
    172. Industrial Applications, Espoo, Finland, 1986, pp. 41-46.
    173. R.Zalewski, A.Graczyk, G.Kruszynski: “Analysis in defect in metal industry with pare to method”, problem jakoscipp, 23-28, 1996.
    174. S.N.Lyengar,“Gating and Risering System part-2: Design of Gating System”, Foundry , An Indian Journal for progressive

    Article Post Production

      No data exists for the row/column.
    Creative Commons License
    Indian Streams Research Journal by Laxmi Book Publication is licensed under a Creative Commons Attribution 4.0 International License.
    Based on a work at http://oldisrj.lbp.world/Default.aspx.
    Permissions beyond the scope of this license may be available at http://oldisrj.lbp.world/Default.aspx
    Copyright � 2014 Indian Streams Research Journal. All rights reserved
    Looking for information? Browse our FAQs, tour our sitemap, or contact ISRJ
    Read our Privacy Policy Statement and Plagairism Policy. Use of this site signifies your agreement to the Terms of Use